Danyang Yongfeng Hardware & Electrical Co.,Ltd -

Danyang Yongfeng Hardware & Electrical Co.,Ltd

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

diamond saw blade
Specification: 105mm
Detail: Cold Pressed - Wave Turbo Saw Blade

diamond saw blade
Specification: 180mm
Detail: Cold Pressed - Flat Turbo Saw Blade

diamond saw blade
Specification: 125mm
Detail: Cold Pressed - Continuous Rim Saw Blade

diamond saw blade
Specification: 105mm
Detail: Cold Pressed - Segmented Saw Blade

tct saw blade
Specification: 203*24T
Detail: Alternate top level taper teeth; for grooving laminated shaving board. The scoring saw blade must be used with panel sizing blade to avoid cracks on the lower side of panel, the kerf can be adjusted through adjust the height ...

tct saw blade
Specification: 203*24T
Detail: It is designed for scoring laminated panels. The scoring saw blade must be used with panel sizing blade to avoid cracks on the lower side of panel, the kerf can be adjusted between 2.8mm to 3.6mm through adjusting the shims;

tct saw blade
Specification: 180*40T
Detail: Trip chip teeth; It is designed for cutting ferrous metal, and aluminum ect ;

tct saw blade
Specification: 160*24t
Detail: anti-kick back design ATB teeth; for cutting dry soft & hard wood with burt, Veneer, Panel used in building site;

tct saw blade
Specification: 230*80t
Detail: Alternate top bevel teeth It's used for cutting both dry soft & hard wood and also can be used to cut shaving bord wood fiber board and joinery board.

tct saw blade
Specification: 110*40T
Detail: Alternate top bevel teeth. Used on cuting wood, plywood, veneer, hardboard, fiberboard and particle boar.


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1